Skip to content
Serving Brooklyn and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (821) 200-7329

Chimney Repair in Brooklyn and Nearby Neighborhoods

Serving Brooklyn and nearby cities.

Tell us what’s going on

Prefer to talk? (821) 200-7329

The short answer

Chimney repair fixes damaged mortar, brick, crowns, flashing, caps, dampers and flue liners before small problems turn into leaks, smoke problems or fire hazards. TrueHearth's certified technicians inspect first, show you what they find, and recommend only the repairs the inspection supports, following the NFPA 211 standard.

A chimney wears down from both sides. Inside, heat, smoke and acidic condensation attack mortar joints and flue tiles. Outside, rain, freeze-thaw cycles and wind work on the brick, crown and flashing. In Brooklyn's brownstones, row houses and multifamily buildings with masonry chimneys, small problems tend to grow quietly until they appear as a leak, a smoky room or brick fragments in the firebox. TrueHearth Chimney Service repairs chimneys in Brooklyn and nearby neighborhoods. Our certified technicians find out what is actually wrong, explain it in plain terms and fix the parts that need fixing.

Signs you need chimney repair

Most chimney damage happens where you can't see it. Homeowners usually notice one of the signs below first. Any one of them is worth a closer look before your next fire or the start of heating season.

  • A smoke or creosote smell in the room, especially on humid days or when the air conditioning runs
  • Poor draft: smoke rolls into the room instead of rising up the flue, or fires are hard to start and keep going
  • Brick flakes, mortar crumbs or pieces of clay flue tile in the firebox
  • White, chalky staining on the brick inside or outside, a sign that water is moving through the masonry
  • Water, rust or damp ash in the firebox after rain
  • Scratching, chirping or nesting sounds in the flue, which often point to a missing or damaged chimney cap
  • Loose or missing bricks, a cracked crown, or gaps in the metal flashing where the chimney meets the roof
Technician lowering an inspection camera into a chimney flue

What's included in a chimney repair visit

Every repair starts with an inspection so the work matches the problem. Depending on what we find, a repair job can include the items below.

We recommend only the repairs the inspection supports. If the chimney needs only a cleaning or a small fix, we will tell you that.

  • Inspection of the firebox, smoke chamber, damper, flue, crown, cap and flashing
  • Camera inspection of the flue liner when cracks or gaps are suspected
  • Tuckpointing: grinding out failed mortar joints and repacking them with new mortar
  • Replacing spalled or loose bricks
  • Repairing or rebuilding the chimney crown
  • Resealing or replacing flashing at the roofline
  • Installing or replacing a chimney cap with an animal screen
  • Damper repair or replacement, including top-sealing dampers
  • Firebox repair with refractory mortar or firebrick
  • Flue liner repair or relining, including stainless steel liners for gas and oil appliances
  • Water repellent for the masonry where it fits the job
  • Photos and a written explanation of what we found and what we did

How our crew works inside your home and on the roof

Inside, the crew lays drop cloths from the door to the fireplace and covers furniture near the work area. Before we open the damper or disturb any soot, we seal the fireplace opening and run HEPA vacuums to keep dust and creosote out of the room. If the flue has to be cleaned before it can be inspected or repaired, we use rotary brushes sized to the flue. A camera run down the flue shows cracked tiles, open mortar joints and liner damage that can't be seen from the firebox, and we share those images with you.

On the roof, we set up safe access with ladders and fall protection and take care with the roofing around the chimney. Masonry work is scheduled for weather that lets mortar cure properly. In row houses and attached buildings, we pay attention to shared walls and neighboring roofs. Before we leave, we clear debris from the roof, yard and sidewalk.

Time for your annual chimney check?

The standard we follow

Our inspections and repairs follow NFPA 211, the standard that calls for chimneys, fireplaces and vents to be inspected once a year. Chimney professionals use three inspection levels, and we choose the level that fits your situation:

Fuel changes matter in New York City. When a building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. A new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue. If you are planning a conversion, bring us in early so the chimney work fits your schedule.

Timing matters too. The city's heat season runs from October 1 through May 31. During that period, building owners must keep apartments heated to the city's minimum temperatures. For buildings where a boiler vents through the chimney, repairs scheduled in late spring or summer avoid taking heat offline when tenants need it.

  • Level 1, when nothing about the system has changed
  • Level 2, when the system changes, such as a new appliance or a switch of fuel, or when the home is sold
  • Level 3, when a hidden hazard has to be reached by opening part of the chimney or the building

What affects the price

We give you a written estimate after the inspection, once we know what the chimney needs. The main factors are:

  • Chimney height and roof access, including roof pitch and any extra safety setup
  • Fuel type (wood, gas or oil), which affects liner material and the kind of damage we usually find
  • Flue size and condition, and whether the existing liner can be repaired or has to be replaced
  • How much soot or creosote has to be removed before repairs can start
  • Whether a camera inspection or a Level 2 or Level 3 inspection is needed
  • The scope of the repair, from a few mortar joints to a rebuilt crown or a full relining
  • Materials, such as brick that has to match an older facade

How a visit works

You contact us and describe what you're noticing. We ask about the fuel type, the age of the appliance and when the chimney was last inspected. Then we set a visit time.

On the day of the visit, the technician inspects the system, shows you photos or camera footage, and explains what is wrong and why. You get a written scope of work and an estimate. Small repairs can often be done during the same visit. For larger masonry or relining jobs, we schedule the work and order materials in advance.

When the work is done, we walk you through it, give you photos of the finished repair, and tell you when the next inspection is due.

Chimney Repair by city

Chimney sweep cleaning a brick chimney on a rowhouse roof

Book Chimney Repair in Brooklyn

Serving Brooklyn and nearby cities.

  • Diagnosis before any repair
  • Written price first
  • Written price before we start

What to expect

How a visit goes

  1. We look before we recommend

    Every job starts with an inspection of the chimney, vent or duct in question. We don't suggest repairs until we've seen the problem and can show it to you.

  2. We explain it in plain language

    You'll hear what we found, what it means for safety, and what your options are, including when the right answer is to leave something alone for now.

  3. We leave the space clean

    We cover floors and furniture around the fireplace or work area and contain soot and debris while we work, then clean up before we go.

FAQ

Common questions

How do I know if my chimney needs repair or just a cleaning?

Buildup alone, such as soot or creosote, usually calls for a cleaning. Crumbling mortar, brick flakes in the firebox, water leaks, a cracked crown or damaged flue tiles call for repair. An inspection tells you which one you need.

Is white staining on my chimney a problem?

White, chalky staining shows that water is moving through the brick and leaving minerals behind. The stain itself is cosmetic. The water behind it can damage mortar and brick over time, so the source should be found and fixed.

Do I need a new liner if my building switches from oil to gas?

Often, yes. In New York City, the chimney has to be evaluated when a boiler converts from oil to gas. Gas exhaust produces acidic condensate that can corrode a masonry flue, so a new liner is frequently part of the job.

How often should my chimney be inspected?

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. A more detailed inspection is used when you change appliances or fuel, sell the home, or a hidden problem is suspected.

Can you repair a chimney in the winter?

Many interior repairs, like damper and firebox work, can be done year-round. Exterior masonry depends on the weather, because mortar needs suitable temperatures to cure. We schedule outdoor work accordingly.

Will chimney repair make a mess in my home?

We lay drop cloths, seal the fireplace opening and use HEPA vacuums to keep soot and dust contained. We clean up inside and outside before we leave.

Not sure what your chimney or vents need?

Tell us what you're noticing and what kind of building you're in. We'll schedule a visit, inspect the system, show you photos of what we find and give you a written price before any work begins.

Call (821) 200-7329 Request Service