Skip to content
Serving Brooklyn and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (821) 200-7329

Chimney Rebuilding in Brooklyn

Serving Brooklyn and nearby cities.

Tell us what’s going on

Prefer to talk? (821) 200-7329

The short answer

You need a chimney rebuild when the brick, mortar or crown has deteriorated past what repointing can fix. Common signs are brick flakes or water in the firebox, white staining on the brick, and leaning or gapped masonry. TrueHearth starts with an inspection, rebuilds only what's damaged down to sound masonry, and adds a new crown, flashing and cap as needed.

A chimney rebuild replaces the parts of a masonry chimney that can no longer be patched. That can mean loose or spalling brick, failed mortar joints, a cracked crown, or a whole section above the roofline that has started to lean. Many brownstones, rowhouses and frame homes in Brooklyn have chimneys that have been through decades of freeze-thaw cycles and heating seasons. At some point, repointing alone stops working. TrueHearth Chimney Service rebuilds chimneys for homeowners in Brooklyn and nearby neighborhoods. Every job starts with an inspection, so you know exactly how much needs to come down and why.

Signs you need it

Chimneys rarely fail all at once. Most owners first notice small changes inside the fireplace or on the outside of the brick. Those changes usually mean water is getting into the masonry. Water loosens mortar and breaks the faces off bricks when it freezes in winter. Over time it can let a section of the stack shift.

If you see more than one of these signs, have the chimney looked at before the next heating season:

  • Brick flakes, crumbled mortar or small debris collecting in the firebox or on the smoke shelf
  • Water in the firebox, or damp, stained walls and ceilings next to the chimney after rain
  • White, powdery staining on the brick, which is mineral salt left behind as water moves through the masonry
  • Poor draft or smoke rolling back into the room, which can mean a partly blocked or damaged flue
  • A persistent smoke or creosote smell, especially on humid days
  • Leaning, bulging or gapped brick above the roof, or a crown that is cracked or missing pieces
Work van with chimney rods, brushes and a HEPA vacuum

What's included in a chimney rebuild

Every rebuild is scoped from the inspection, so the amount of work varies from chimney to chimney. A typical rebuild includes:

If the inspection shows the liner itself is cracked or corroded, we'll explain your relining options before any rebuilding starts. This matters most in buildings that have converted from oil to gas. In New York City, the chimney has to be evaluated as part of that conversion. A new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue.

  • An inspection of the chimney inside and out, with photos of the damaged areas
  • Removal of damaged brick down to sound masonry, whether that is a few courses or the full stack above the roofline
  • Rebuilding with brick matched as closely as practical to the existing chimney, laid in fresh mortar
  • A new or rebuilt crown, shaped to shed water away from the flue
  • Resetting or replacing flue tiles where the rebuild exposes them, plus a check of the liner
  • New flashing where the chimney meets the roof
  • A chimney cap to keep out rain, debris and animals, if the chimney doesn't already have a sound one
  • Final cleanup and a walk-through of the finished work, with photos

How our crew works in your home and on the roof

Most of a rebuild happens on the roof, but the crew also works inside your home at the fireplace or the appliance connection. They lay drop cloths from the door to the work area and seal the fireplace opening. They run HEPA vacuums while removing debris so brick dust and soot don't spread through the room. Rotary brushes clean the flue before and after the masonry work. A camera goes down the flue so we can see liner joints and cracks that aren't visible from the top or the firebox.

On the roof, we set up safe access and protect the roofing around the chimney. Materials go up and debris comes down in a controlled way, never by dropping it, and we haul away the old brick and mortar. If the roof or a neighbor's wall sits close to the work, we plan the setup with you before the crew arrives. Masonry needs dry weather and moderate temperatures to cure properly. We schedule around the forecast and will tell you if conditions call for a short delay.

Time for your annual chimney check?

The standard we follow

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. Chimney professionals use three inspection levels. Level 1 applies when nothing about the system has changed. Level 2 applies when the system changes, for example a new appliance or a switch of fuel, or when the home is sold. Level 3 applies when a hidden hazard can only be reached by opening part of the chimney or building.

A rebuild changes the chimney, so we treat the evaluation as a Level 2 inspection. If damage is hidden behind walls or finishes, a Level 3 may be needed. Our certified technicians follow NFPA 211 throughout the work. After the rebuild, we recommend going back to a yearly inspection schedule.

What affects the price

We quote every chimney after inspecting it, because the same symptoms can mean very different amounts of work. The main factors are:

We put the scope in writing so you can see what each part covers before you agree to it.

  • The height of the chimney and how hard the roof is to reach, including roof pitch, building height and access from the street
  • How much of the stack has to come down, and whether the damage extends below the roofline
  • The fuel type and what the chimney serves: a wood fireplace, a gas or oil boiler, or more than one appliance
  • Flue size and condition, including whether tiles or the liner need replacement
  • How much soot or creosote buildup has to be cleaned out first
  • Whether a camera inspection, liner work or other repairs are needed alongside the rebuild

How a visit works

First, we inspect. A technician checks the chimney at the firebox or appliance connection, from the roof, and down the flue with a camera. Then they walk you through what they found, with photos.

Next, you get a written scope that explains what needs rebuilding, what can stay, and any liner or flashing work involved. If a smaller repair will solve the problem, we'll tell you.

Then we schedule the work. If your chimney serves a boiler in a building with tenants, plan around New York City's heat season. It runs from October 1 through May 31, and building owners must keep apartments heated to the city's minimum temperatures during that time. We can help you choose timing that keeps the heating system in service when it's needed.

On the day of the work, the crew protects the inside work area, sets up roof access and rebuilds the chimney. When the job is done, they clean up, show you the finished chimney and give you photos for your records.

Chimney sweep cleaning a brick chimney on a rowhouse roof

Book Chimney Rebuilding in Brooklyn

Serving Brooklyn and nearby cities.

  • Diagnosis before any repair
  • Written price first
  • Written price before we start

What to expect

How a visit goes

  1. We look before we recommend

    Every job starts with an inspection of the chimney, vent or duct in question. We don't suggest repairs until we've seen the problem and can show it to you.

  2. We explain it in plain language

    You'll hear what we found, what it means for safety, and what your options are, including when the right answer is to leave something alone for now.

  3. We leave the space clean

    We cover floors and furniture around the fireplace or work area and contain soot and debris while we work, then clean up before we go.

FAQ

Common questions

How do I know if I need a rebuild or just repointing?

Repointing replaces worn mortar joints when the bricks themselves are still sound. A rebuild is needed when bricks are spalling or loose, the crown has failed, or the stack is leaning. The inspection shows which situation you're in.

Can I use my fireplace or boiler during the rebuild?

Usually not while the crew is working on the flue. We'll tell you in advance when the appliance needs to be off and when it's safe to use again.

Will the new brick match my existing chimney?

We match brick color, size and mortar as closely as practical. Older brick can be hard to match exactly, so we'll show you options before the work begins.

How long does a chimney rebuild take?

It depends on how much of the chimney comes down, roof access and the weather, since mortar needs suitable conditions to cure. You'll get an expected timeline with your written scope.

Will a rebuild stop my chimney from leaking?

If the leak comes from damaged masonry, a failed crown or bad flashing, the rebuild addresses those sources. If the inspection points to another cause, such as the roof itself, we'll tell you.

Do I still need yearly inspections after a rebuild?

Yes. The NFPA 211 standard calls for chimneys to be inspected once a year, and a yearly check helps catch new problems early.

Not sure what your chimney or vents need?

Tell us what you're noticing and what kind of building you're in. We'll schedule a visit, inspect the system, show you photos of what we find and give you a written price before any work begins.

Call (821) 200-7329 Request Service