The short answer
Fireplace and damper repair fixes the parts that control smoke, drafts and water: the damper, the firebox brick and mortar, and the smoke chamber. TrueHearth's certified technicians inspect first following NFPA 211, explain what they find, and give you a quote before any work starts.
A fireplace that smokes into the room, a damper that won't close, or a firebox with crumbling joints is more than an annoyance. These parts control where smoke and heat go. When they fail, smoke, drafts and water get into your living space. TrueHearth Chimney Service repairs fireplaces and dampers in brownstones, row houses and single-family homes across Brooklyn and nearby neighborhoods. Our certified technicians first find out why the problem is happening. Then they fix what needs fixing: a stuck or rusted damper, cracked firebrick, failed mortar joints, a damaged smoke chamber, or a missing top-sealing damper. We explain what we find in plain terms before any repair work begins.
Signs you need it
Many fireplace and damper problems build slowly, so homeowners often get used to them. If you notice any of these, have the system looked at before your next fire.
A damper that doesn't seal also lets heated air escape up the chimney all winter. An open, uncapped flue can let in birds, squirrels and raccoons.
- Smoke rolling back into the room, or poor draft when you light a fire
- A smoke or creosote smell in the room, especially on humid days or when the fireplace isn't in use
- A damper handle that sticks, won't close all the way, or hangs loose
- Cold drafts coming down the chimney with the damper shut
- Brick flakes, crumbled mortar or other debris collecting in the firebox
- Water in the firebox or rust on the damper plate after rain
- White staining on the brick around the fireplace or on the chimney
- Scratching or chirping sounds that suggest an animal got in through an open damper or uncapped flue

What's included
Every repair visit starts with an inspection so we fix the cause, not just the symptom. Depending on what we find, the work can include the following.
- Inspection of the firebox, damper, smoke chamber and visible flue
- Cleaning soot and creosote where it blocks the view or the repair
- Freeing, adjusting or replacing a throat damper, including handles and hardware
- Installing a top-sealing damper at the top of the chimney when the old throat damper can't be saved
- Replacing cracked or loose firebrick and repointing firebox joints with heat-rated refractory mortar
- Parging or repairing a rough or damaged smoke chamber
- Checking the chimney cap, crown and flashing when water is getting in
- Photos of what we found and a written summary of the work done
How our crew works in your home and on the roof
Inside your home, we lay drop cloths from the door to the hearth and seal the fireplace opening before we start. HEPA vacuums run during cleaning and demolition, so soot and mortar dust are captured instead of drifting into the room. When the flue needs to be cleared for a proper look, we use rotary brushes sized to the flue. If the condition of the smoke chamber or flue can't be seen from below, we run a camera up the chimney.
On the roof, we check the crown, cap, flashing and the top of the flue. A top-sealing damper mounts up there, with a cable that runs down to a handle in the firebox. We use safety gear suited to the building. We'll tell you ahead of time if we need a ladder or roof hatch access.
Before we leave, we vacuum the hearth and surrounding floor and remove all debris and old parts.
Time for your annual chimney check?
The standard we follow
We follow NFPA 211, the national standard for chimneys, fireplaces and vents. It calls for these systems to be inspected once a year, even if you rarely use the fireplace.
Chimney professionals use three inspection levels. Level 1 applies when nothing about the system has changed. Level 2 applies when the system changes, for example a new appliance or a switch of fuel, or when the home is sold. Level 3 is for when a hidden hazard has to be reached by opening part of the chimney or building. We'll tell you which level your situation calls for and why.
Many Brooklyn homes rely on heat most during New York City's heat season, which runs from October 1 through May 31. It's worth getting damper and firebox repairs done before October so the fireplace is ready when the weather turns.
What affects the price
We quote after we've seen the fireplace, because the same symptom can have very different causes. The main factors are listed below.
If more than one repair is needed, we list each one separately. We'll tell you which are safety issues and which can wait, so you can plan.
- Chimney height and how easy it is to reach the roof
- Fuel type: wood-burning, gas logs or a converted fireplace
- Flue size, shape and condition
- How much soot and creosote buildup has to be removed first
- Whether a camera inspection is needed to see the smoke chamber or flue
- How much repair is needed: a damper adjustment is very different from rebuilding a firebox wall
How a visit works
When you contact us, we'll ask what you're noticing, what type of fireplace you have, and how the roof is reached. Then we schedule a visit and give you an arrival window.
On site, the technician protects the work area, inspects the fireplace and damper, and shows you photos of what they found. You get a clear explanation of your options and a quote before repair work starts. Small fixes, such as a damper adjustment, can often be done the same day. Masonry work or a new top-sealing damper may need a return visit so materials can be ordered and mortar can cure. When we're done, we clean up, test the damper, and show you how to operate it.

