Skip to content
Serving Brooklyn and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (821) 200-7329

Chimney Inspection in Fort Greene, Brooklyn

Serving Fort Greene and nearby cities.

Tell us what’s going on

Prefer to talk? (821) 200-7329

The short answer

Fort Greene homeowners should have their chimneys inspected once a year, as the NFPA 211 standard calls for. A Level 1 inspection fits most systems that haven't changed. A new appliance, a switch from oil to gas, or a home sale calls for a Level 2.

Many Fort Greene homes were built long before modern heating equipment, and their chimneys have outlasted several boilers, furnaces and fireplace habits. A chimney inspection tells you what condition the flue is in today, whether it suits the appliance connected to it, and what needs attention before you light a fire or turn on the heat. TrueHearth Chimney Service sends certified technicians from our Prospect Heights office, about a mile away, to brownstones, rowhouses and apartment buildings throughout the 11205 area.

Why Fort Greene Chimneys Need a Close Look

Most housing in Fort Greene is older masonry: brownstones, brick rowhouses and pre-war apartment buildings. Chimneys in these buildings often serve more than one purpose over their lifetime. A flue that once carried coal or wood smoke may now vent a gas boiler. A parlor fireplace may sit unused for years until a new owner decides to use it again.

Attached homes add another layer. In a row of brownstones, chimneys can run close to or alongside a neighbor's. Cracks, gaps or worn mortar may not be visible from inside your rooms. An inspection looks at the parts you can't easily see. That way, decisions about repairs, relining or simply using the fireplace rest on actual conditions.

Chimney Inspection at a home

Choosing the Right Inspection Level

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. Chimney professionals use three inspection levels. The right one depends on what has happened since your last inspection:

Most Fort Greene homeowners who use their chimney the same way each year will need a Level 1. Plan on a Level 2 if you're buying or selling a brownstone or if you've replaced your heating equipment.

  • Level 1: For a system that hasn't changed and is used the same way. The technician examines the readily accessible parts of the chimney, the appliance connection and the fireplace.
  • Level 2: For when the system changes, such as a new boiler or water heater or a switch from oil to gas, or when the home is sold. It is a more thorough look at the flue's interior and typically uses a camera.
  • Level 3: For when there is reason to suspect a hidden hazard that can only be reached by opening part of the chimney or the building around it.

What We Check During an Inspection

Our technicians focus on the parts of the system that affect safe venting and the condition of the masonry:

Afterward, we explain what we found in plain terms and walk you through any recommended next steps. You'll know where your chimney stands and what, if anything, needs to happen before you use it.

  • The flue liner, including cracks, gaps or missing sections
  • Creosote, soot and debris buildup inside the flue
  • Blockages such as nests or fallen masonry
  • The crown, cap and flashing, where water often gets in
  • The damper, smoke chamber and firebox
  • The connector pipe from a boiler, furnace or water heater

Time for your annual chimney check?

Oil-to-Gas Conversions and Chimney Liners

Many buildings in the neighborhood have converted their boilers from oil to gas or are planning to. When a New York City building makes this change, the chimney has to be evaluated as part of the work. A new liner is often needed, because gas exhaust produces acidic condensate that can corrode a masonry flue.

If a conversion is coming up, schedule an inspection early in the planning. It tells you and your heating contractor whether the existing flue can be used or needs relining before the new boiler goes in.

Timing Your Inspection Around Heat Season

New York City's heat season runs from October 1 through May 31. During that time, building owners must keep apartments heated to the city's minimum temperatures. If you own a multi-unit brownstone or small apartment building, finding a venting problem in January can mean scrambling for repairs while tenants need heat. An inspection in late spring or summer gives you time to fix issues before October.

The same logic applies to fireplaces. If you inspect before the first cold snap, you won't be waiting for an appointment when you want to use it.

Serving Fort Greene and Nearby Neighborhoods

Our office is in Prospect Heights, so homes in Fort Greene are a short trip for us. We also inspect chimneys in Clinton Hill, Downtown Brooklyn, DUMBO, Boerum Hill and Prospect Heights. Many homes there share the same mix of brownstones, rowhouses and pre-war buildings.

More services in Fort Greene

Related

Chimney sweep cleaning a brick chimney on a rowhouse roof

Book Chimney Inspection in Fort Greene

Serving Fort Greene and nearby cities.

  • Diagnosis before any repair
  • Written price first
  • Written price before we start

What to expect

How a visit goes

  1. We look before we recommend

    Every job starts with an inspection of the chimney, vent or duct in question. We don't suggest repairs until we've seen the problem and can show it to you.

  2. We explain it in plain language

    You'll hear what we found, what it means for safety, and what your options are, including when the right answer is to leave something alone for now.

  3. We leave the space clean

    We cover floors and furniture around the fireplace or work area and contain soot and debris while we work, then clean up before we go.

FAQ

Common questions

How often should I have my chimney inspected in Fort Greene?

Once a year. The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected annually, whether you burn wood or vent a gas or oil appliance.

Do I need an inspection if I never use my fireplace?

Often, yes. In many brownstones the chimney also vents the boiler or water heater. An unused flue can also collect debris or nests, which is worth knowing about before anyone decides to light a fire.

Which inspection level do I need when buying a brownstone?

A Level 2. The NFPA 211 levels call for a Level 2 inspection when a home is sold, as well as when a new appliance is installed or the fuel type changes.

Will converting my boiler from oil to gas require a new chimney liner?

Not always, but often. In New York City the chimney has to be evaluated during an oil-to-gas conversion. Gas exhaust produces acidic condensate that can corrode a masonry flue, so a new liner is frequently needed.

Is a chimney inspection the same as a chimney cleaning?

No. An inspection evaluates the condition of the chimney and venting system. A cleaning removes soot, creosote and debris. If the inspection shows a cleaning is needed, we'll explain why and talk through scheduling it.

When is the best time to schedule an inspection?

Late spring or summer works well. City heat season starts October 1, so inspecting before then gives you time to handle any repairs before you need the heat or the fireplace.

Not sure what your chimney or vents need?

Tell us what you're noticing and what kind of building you're in. We'll schedule a visit, inspect the system, show you photos of what we find and give you a written price before any work begins.

Call (821) 200-7329 Request Service